Lunawood Siding / Cladding - Luna Arctic Layer
About Lunawood Luna Arctic Layer Cladding & Siding
Luna Arctic Layer Brushed is a premium ThermoWood cladding crafted from Nordic Spruce, featuring a textured, brushed surface pre-treated with a silver-grey coating. Engineered to weather naturally over time, the factory finish gradually fades on weather-exposed sections while maintaining rich grey tones in shaded areas, delivering a beautifully balanced, weathered appearance. It is the perfect solution for achieving an instant silver-grey facade right upon installation. Additionally, its versatile shiplap profile makes it an excellent choice for interior accent walls and ceilings.
Luna Arctic Layer Specifications
Dimensions
19 mm x 142 mm (1x6)
19 mm x 188 mm (1x8)
Wood Species
Nordic Spruce.
Class
LunaThermo-D.
Surface Finish
Brushed, factory-coated (silver-grey finish).
Performance
ThermoWood provides outstanding dimensional stability and requires minimal upkeep when installed to Lunawood specifications. The silver-grey treatment is uniquely engineered to evolve gracefully over time, naturally weathering on exposed surfaces while preserving grey highlights in sheltered sections.
Fastening System (Recommended Guidelines)
- Screws: Self-drilling stainless steel screws, minimum AISI 304 (A2 grade)
- Screw Length: Must exceed 2x the cladding thickness (for 19 mm cladding, use a minimum of 38 mm / 1-1/2"; adjust as needed for your subframe)
- Fastener Quantity: Due to the profile width of 142 mm (140 mm+), secure with two screws at every board-to-batten intersection
Installation Guidelines
- Install over a properly ventilated rainscreen framing system in compliance with Lunawood instructions.
- Pre-drill pilot holes when fastening within 70 mm of board ends (pilot hole diameter: 0.5Ø to 0.8Ø, where Ø = screw diameter).
- Drive screws to flush depth to prevent surface staining and eliminate water traps.
Warranty
Lunawood offers a 20-year limited warranty for projects within EU countries and regions recognizing the EU EN 335 standard when applied to exterior siding, interior walls, or ceilings. The warranty covers new projects that are registered and approved by Lunawood. Contact your local Lunawood partner to register and activate coverage.
Sustainability
Sustainably produced ThermoWood from Finland. ThermoWood is thermally modified using only heat and steam, completely free of chemical additives.
Technical Resources
- Lunawood Facade Installation Guide (ENG)
- Quick Installation Guide for Lunawood Facade
- Lunawood ThermoWood Product Description
- Luna Arctic Product Brochure
- Environmental Product Declaration (EPD)
ⓘ Lunawood ThermoWood is a natural wood material featuring knots along with subtle variations in texture, grain, and color. Images are for illustrative purposes. Wood ages naturally, and fine surface checks or hairline cracks may develop over time. Color shifts are to be expected due to weather exposure and environmental factors.
About Lunawood Luna Arctic Layer Cladding & Siding
Luna Arctic Layer Brushed is a premium ThermoWood cladding crafted from Nordic Spruce, featuring a textured, brushed surface pre-treated with a silver-grey coating. Engineered to weather naturally over time, the factory finish gradually fades on weather-exposed sections while maintaining rich grey tones in shaded areas, delivering a beautifully balanced, weathered appearance. It is the perfect solution for achieving an instant silver-grey facade right upon installation. Additionally, its versatile shiplap profile makes it an excellent choice for interior accent walls and ceilings.
Luna Arctic Layer Specifications
Dimensions
19 mm x 142 mm (1x6)
19 mm x 188 mm (1x8)
Wood Species
Nordic Spruce.
Class
LunaThermo-D.
Surface Finish
Brushed, factory-coated (silver-grey finish).
Performance
ThermoWood provides outstanding dimensional stability and requires minimal upkeep when installed to Lunawood specifications. The silver-grey treatment is uniquely engineered to evolve gracefully over time, naturally weathering on exposed surfaces while preserving grey highlights in sheltered sections.
Fastening System (Recommended Guidelines)
- Screws: Self-drilling stainless steel screws, minimum AISI 304 (A2 grade)
- Screw Length: Must exceed 2x the cladding thickness (for 19 mm cladding, use a minimum of 38 mm / 1-1/2"; adjust as needed for your subframe)
- Fastener Quantity: Due to the profile width of 142 mm (140 mm+), secure with two screws at every board-to-batten intersection
Installation Guidelines
- Install over a properly ventilated rainscreen framing system in compliance with Lunawood instructions.
- Pre-drill pilot holes when fastening within 70 mm of board ends (pilot hole diameter: 0.5Ø to 0.8Ø, where Ø = screw diameter).
- Drive screws to flush depth to prevent surface staining and eliminate water traps.
Warranty
Lunawood offers a 20-year limited warranty for projects within EU countries and regions recognizing the EU EN 335 standard when applied to exterior siding, interior walls, or ceilings. The warranty covers new projects that are registered and approved by Lunawood. Contact your local Lunawood partner to register and activate coverage.
Sustainability
Sustainably produced ThermoWood from Finland. ThermoWood is thermally modified using only heat and steam, completely free of chemical additives.
Technical Resources
- Lunawood Facade Installation Guide (ENG)
- Quick Installation Guide for Lunawood Facade
- Lunawood ThermoWood Product Description
- Luna Arctic Product Brochure
- Environmental Product Declaration (EPD)
ⓘ Lunawood ThermoWood is a natural wood material featuring knots along with subtle variations in texture, grain, and color. Images are for illustrative purposes. Wood ages naturally, and fine surface checks or hairline cracks may develop over time. Color shifts are to be expected due to weather exposure and environmental factors.